![[BKT-CP-009/ALU] Bike rack 009 (Cast Aluminum, Capacity 2 bikes)](/web/image/product.product/11507/image_1920/%5BBKT-CP-009-ALU%5D%20Bike%20rack%20009%20%28Cast%20Aluminum%2C%20Capacity%202%20bikes%29?unique=80b1838)
Specs
General measures
| Color | Cast Aluminum o Black |
| Type | Capacity 2 bikes o Detachable |
| Finishes | natural aluminum |
| Dimensions | 90 cm x 30 cm x 12 cm |
| Manufacturing | Cast aluminum and vulcanized rubber |
| Author | Industrial design No. 52583 In compliance with the provisions of article 409 of the Federal Law for the Protection of Industrial Property, it is stated and made public knowledge that the product and designs reproduced below are protected before the Mexican Institute of the Industrial Property with registration number 52583 INDUSTRIAL PARKING MODEL FOR BICYCLES, whose owner is RODRIGO VÁZQUEZ ORTEGA; rights that are in force and having all their legal effects. |
Materials.
Aluminum-casting
The aluminum structures are made with AlMg3 material, suitable for outdoor use. A stainless granulate is blown onto the surface of the molten aluminium, which limits the appearance of corrosion.
| The use of an aluminum casting without powder coating is very common; Over time, the entire surface of the casting acquires a uniform tone. The appearance of aluminum oxide caused by inclement weather is a completely normal phenomenon and, therefore, it is not considered the subject of a claim..
|
If the client wants to avoid oxidation, it is convenient to apply a layer of powder paint to the surface.
|
Materials.
Steel
The basic material used for the manufacture of most product components is grade 11373 (S235JR) or better grade steel. The tolerances comply with the ISO 2768-1 «m» standard, quality of imperfections according to the EN 25817 «C» standard.
|
Most of steel parts are processed as follows:
CNC laser cutting
CNC bending
Galvanizing - different methods
Degreasing by washing at 80oC–iron phosphating (anti-corrosion protection)
Achromatic passivation (cleaning with distilled water)
Drying at a temperature of 190oC for 10-20 minutes
Electrostatic powder coating application |
Metallic finishes
All our products go through a series of processes according to the type of material and use, in order to provide the highest possible quality and durability; The combination of these processes is a particular art achieved in years of experience, which only the right technology and raw material allow. The finishing method is according to the model and part of the product: |